This is the way I modified the battery tray to allow rechargeable NiMh cells to be charged inside the newton.

I used an 10 Kohm radial thermistor. You just have to make a couple of very thin holes where the photo shows.

Upper view:
The termistor is bended up at an angle enough to be in contact with the batteries

Click for a larger view

I cut two pieces of tin to make the added battery contacts.
These pieces are soldered to the thermistor.

Bottom view:

Click for a larger view

The longer one is also bent to make contact with the negative pole of the last cell.


Click for a larger view

A couple of superglue drops will maintain the contacts in their place.

Home

Newton

Yopy

Curriculum

Photos